• Product Name：Titanium (steel) pickling passivator (HC-322)
• Add Time：2022-05-31 16:44:50
•  
• Tel：0550-7093728
  Email：web@chemhc.cn
  

Features:

        Pickling and passivation are completed at one time, the reaction speed is fast, the rubbish is removed, and no spots are produced.

        Strong adhesion, easy to observe, easy to operate and use.

Instructions:

        Apply this product to the surface to be treated with a thickness of 0.5-2mm. The reaction time is 1-10 minutes. When the temperature is below 0°C or where the oxide scale is thick, the time should be appropriately extended. After the reaction is complete, use a rag or silk brush to remove it, and then rinse with water.

Scope of use:

         It is widely used in the surface treatment of titanium machinery and equipment, pressure vessels, engineering components, etc. in the chemical, food, printing and dyeing, aviation, and other industries.

Precautions:

         Operate outdoors or in a well-ventilated room. Avoid direct skin contact, and flush with plenty of water if accidentally touched. Containers should be stainless steel or plastic. Generally, there is no precipitation. If there is a small amount of precipitation, the gel state can be restored after shaking, which does not affect the use effect.

Cost comparison:

         The brushing area is more than 2 times that of conventional products.