The color of the color stainless steel door here refers to the color obtained by the vacuum electroplating equipment or the color of the surface layer color film obtained by the chemical reaction of water plating, such as vacuum-plated rose gold, black titanium, champagne color, titanium gold, bronze , wine red, brown, etc., water plating often used are: green bronze, red copper, antique copper and black titanium.

       This type of door has become a necessary anti-theft device and decorative door in the home because of its high cost performance and long service life. After a long time of use, the color stainless steel door of my home is rusted and covered with stains. What should I do? What about cleaning?

       Although stainless steel has good corrosion performance, it will be easily corroded if exposed to a corrosive environment for a long time. Therefore, the surface of the colored stainless steel door must be regularly cleaned and maintained. Do not use detergents containing bleach and abrasives, steel balls, grinding tools, etc. In order to remove the detergent, clean it with clean water after washing. However, when washing stainless steel doors, it is not as simple as wiping and rinsing with detergents. It depends on what kind of dirt it is on the surface. Different dirt is treated with different cleaning methods! Today, Hongyang shares with you the cleaning methods for colored stainless steel doors!

Case yi

       If there is only dirt on the surface of the door, then wipe it with detergent water. However, it should be noted that the material of the stainless steel door is mirror surface or brushed. If the mirror surface is used, special attention should be paid to cleaning tools, and the rag must be clean and dust-free. In addition, stainless steel cleaning has a special detergent, called stainless steel cleaning agent or stainless steel brightener, and also uses a special care agent, including stainless steel oil, which can remove stains and restore the brightness of stainless steel.

second case

       If you want to remove the tape marks on the door logo or film, you can wipe it with warm water, and then scrub with alcohol.

third case

       If there is dirt such as oil stains on the surface, you can directly wipe it with a soft cloth, and then clean it with an ammonia solution.

Fourth case

       If there is bleach and various acids on the surface of the colored stainless steel door, it can be rinsed with water immediately, then washed with neutral carbonated soda water, and then rinsed with water.

Fifth situation

       There are rainbow patterns on the surface of the door, which may be caused by using too much oil or detergent. Wash it with warm water.

the sixth case

       If there is rust on the surface, it can be cleaned with 10% nitric acid, or a special maintenance solution can be used, and then painted with a similar color to achieve a 1-meter appearance that is difficult to see.

seventh case

       If there are stubborn stains on the surface, you can wipe the radish or cucumber with detergent and wipe it hard. Never use steel wool, which will cause great damage to the door.

       In addition, after the color stainless steel door is installed, the protective film should be torn off within a week, otherwise the protective film will be exposed to the wind and the sun, and the protective wax will not be able to be torn or it will be difficult to tear. First of all, it is suggested that the color stainless steel door is very difficult to clean, especially when it is rusted, so when customizing the stainless steel door, 304 material should be considered as the door material.