• Product Name：Titanate coupling agent HC-7
• Add Time：2022-05-31 17:18:05
•  
• Tel：0550-7093728
  Email：web@chemhc.cn
  

Product Name: Phosphate

Exterior:

      yellow-brown viscous liquid

      Density D25: ≥ 1.095 g/cm3;

      Viscosity η25: 2800±15% mm2/s;

      Refractive index ND25: 1.495±0.003;

      Flash point (opening): ≥150℃;

      PH value (test paper): 2.5±0.5

use:

      Put the filler or pigment to be treated in the high-speed mixer, slowly add the product diluted with 1:1 diluent under the condition of low-speed rotation of the mixer, and then start the high-speed stirring for about 5-15 minutes, Add resin and other auxiliaries according to the original process.

Features:

     ★It has remarkable dispersion effect and can be used in combination with other coupling agents.

     ★ Almost odorless, better than general coupling agent.

Dosage:

      Dilute this product with a diluent (white oil, alcohol, isopropyl alcohol, motor oil, water, etc.) 1:1, and then spray it on the pigment or filler in high-speed stirring (can also participate in grinding). The specific stirring time depends on the dispersion effect. Experiment Sure.

Shipping and storage:

      This product is non-flammable and explosive, and can be packaged, transported and stored in plastic drums or plastic-coated steel drums.

      The shelf life of this product is 2 years at room temperature. If it comes into contact with water, it will emulsification and the concentration will decrease, but it will not affect the internal quality.