Professional stainless steel cleaning agent, can be used for cleaning stainless steel workpieces, stainless steel accessories, stainless steel pipes, stainless steel tableware aluminum alloy workpieces, aluminum products, aluminum fins, aluminum plates and other surface dirt, rust, oil, etc. This product integrates four functions in one , greatly reducing the many cleaning procedures in the past, saving cleaning time, and greatly improving the cleaning effect. After using this product to clean, it is a product that makes the surface bright as new without using polishing agent, and it is economical. It is an ideal product for cleaning stainless steel and aluminum products. This product contains a variety of surfactants imported from abroad, and various acid salts (without dangerous chemicals) and cleaning auxiliaries.

Instructions:

      1. This product can be used according to the specific requirements of customers or by immersion and cleaning. This product is an ultra-concentrated original liquid. When using this product, it can be diluted 2-6 times according to the weight of dirt and rust on the product. Soak for 3-6 minutes, pick up and dry or wipe dry with a dry cloth.

      2. Machine wash method, wave the product after treatment and dry it.

      In the metal products processing industry, stainless steel is widely used due to its good plasticity, hardness and acid and alkali resistance. Stainless steel has good chemical stability to acid and alkali, so it is more appropriate to use water washing for degreasing cleaning. Generally, alkaline cleaning is used, and acid can be used under special conditions. For stainless steel materials with poor oxidation resistance, the anti-rust protection of the substrate should be paid attention to during cleaning.

1. Introduction

      Stainless steel cleaning agent is a series of water-based cleaning agents. The main components are: water-based degreasing active agent, as well as various accelerators and metal protective agents. It has good degreasing and cleaning ability, and also has the function of substrate protection.

2. Use

      Stainless steel cleaning agent is mainly used in precision hardware, precision parts processing and other industries to clean oil stains, stains, inorganic salts, hand sweat, dust and other dirt on metal surfaces such as stainless steel.

3. Main performance

      1. The stainless steel cleaning agent is an alkaline product with strong penetration, dispersion, solubilization and emulsification.

      2. It has good cleaning ability to grease and dirt, and its degreasing and decontamination cleaning ability is super strong.

      3. Completely dissolved, easy to rinse, with little or no residue; and can effectively protect the surface of the cleaned material from erosion while cleaning.

      4. Green, universal, efficient, safe and economical. It is an ideal substitute for degreasing powder.

4. How to use

      1. When using this product, you should communicate with our customer service personnel in advance, or allow the customer service personnel to provide on-site guidance.

      2. The cleaning method can be hot soaking, ultrasonic cleaning, manual wiping, etc. Our service personnel will design suitable application methods for you.

      3. Generally, the original solution and water are prepared into a cleaning solution with a concentration of 2% to 5%. The concentration of the cleaning solution is adjusted according to the severity of the oil pollution.

      4. This product has the best cleaning effect under the water temperature of about 65 ℃.

5. Packaging and storage

      1. Packing: 20kg/plastic bucket.

      2. Storage: Sealed and stored in a cool, dry and ventilated place with a shelf life of 2 years.

6. Features

     1. This product is colorless and transparent;

     2. No traces are left on the surface of the workpiece after use, and the appearance will not be affected;

     3. The surface is dry, oil-free, and does not affect sticking labels or painting;

     4. Water-based non-flammable, safe,

7. Protection time

     1. Adjust the concentration with water according to the required protection period.

     2. 5% concentration, the protection period is 1-7 days

     3. 5-10% concentration, the protection period is 7 days to 1 month

     4. More than 10%, the protection period is 1 month to 3 months.

     5. The protection of aluminum can be achieved without oxidation and discoloration for 2 years.